Artila Electronics Co.
Matrix 504
- Matrix 504
Linux-ready ARM9 Box Computer with 1x LAN, 4x TTY, 2x USB Port
Features
- CPU: ATMEL AT91SAM9G20, 400MHz
- OS: Linux 2.6.29 pre-built
- NAND Flash: 128MB
- SDRAM: 128MB
- System backup Data Flash: 2MB
- USB 2.0 ports: two hosts, 12Mbps
- Ethernet port: one, 10/100Mbps
- TTY (serial) ports: four, 921.6Kbps baud
- Serial Console port: one, dedicated
- GNU C/C++ tool chain included
- Power input: 9~48VDC, 300mA@12V
- Extremely compact design, 78 x 108 x 24 mm
- Matrix 504 application
The Matrix-504 is Artila's 2nd-generation ARM9- based box computer with pre-built Linux kernel and file system. It comes with a 400MHz ARM9 CPU, 128MB NAND Flash and 128MB SDRAM. Which enbales the Matrix-504 perform more tasks at the same time while retaining high responsiveness.
Matrix 500
- Matrix 500
Linux-ready ARM9 Box Computer with 1x LAN, 4x TTY, 2x USB Port
Features
- CPU: ATMEL AT91RM9200, 180MHz
- OS: Linux 2.6.x pre-built
- Memory: 64MB SDRAM and 16MB Flash
- Storage: one SD memory card slot inside
- USB 2.0 ports: two hosts
- Ethernet port: one, 10/100Mbps
- TTY (serial) ports: four, 921.6Kbps baud
- GNU C/C++ tool chain included
- Power input: 9~48VDC, 300mA@12V
- Extremely compact design, 78 x 108 x 24 mm
The Matrix-500 is the world's smallest Linux-ready ARM9-based computing platform for embedded headless run-only application. It comes equipped with one Ethernet, four TTY (serial) ports, two USB host ports, plus one internal SD memory card slot in an incredible small package measuring.
M-502
- M-502
Linux-ready ARM9 System-on-Module
Features
- Compact: 50 x 80 mm
- Linux kernel 2.6.29 with file system
- CPU: ATMEL AT91SAM9G20 w/MMU, 400MHz
- Flash: 128MB, NAND type
- SDRAM: 64MB
- Ethernet Interface: 1x, 10/100 Mbps
- USB Host Interface: 2x, USB 2.0 compliant
- 1 x SD (secure digital) interface
- UART: 4x 921.6kbps w/ hardware flow control
- I2C interface: yes
- I2S interface: yes, including
- 1x transmitter and 1x receiver
- SPI interface w/ 2 x chip select signals
- GPIO: 32 x pins, CMOS/3.3V compatible
- Ultra low power consumption of less than 2.5W
- GNU C/C++ tool chain for Linux and Windows
M-508 / M-508T
- M-508 / M-508T
Linux-ready ARM9 Single Board Computer
Features
- ATMEL AT91RM9200 CPU, 200MIPS @180MHz
- 64MB SDRAM, 32MB NOR FLASH memory
- 512KB non-volatile SRAM(M-508T only)
- -20 to 80C wide-temperature operation(M-508T only)
- One 10/100 Mbps Ethernet interface
- Two USB 2.0 Host ports
- One SD (secure digital) interface
- Four 921.6Kbps RS-232/485 ports
- GPIO: 32x pins, CMOS-level
- Small footprint, 105x75mm ony
- Single 5V power input
- Ultra low power consumption, less than 3 Watts
- Linux 2.6.x OS is pre-built, supports file system
- GNU C/C++ tool chain is included
The M-508/M-508T is a mini-mighty Linux-ready ARM9-based single board computer. Users can operate the M-508/M-508T the same way as they do on a normal Linux
desktop. The M-508/M-508T comes equipped with one Ethernet, four RS-232/485 ports, two USB 2.0 host ports, plus one SD memory card slot and 32x GPIOs in an incredible small package measuring only 105x 75mm.
M-501
- M-501
Linux-ready ARM9 Embedded SoM
Features
- ATMEL AT91RM9200 CPU, 200MIPS @180MHz
- 64MB SDRAM, 16MB NOR FLASH memory
- One 10/100 Mbps Ethernet interface
- Two USB 2.0 Host ports
- One SD (secure digital) interface
- Four 921.6kbps UARTs
- I2C (Inter-IC) bus
- I2S (Inter-IC Sound) bus,
- one transmitter and one receiver
- SPI (Serial Peripheral Interface)
- GPIO: 32x pins, CMOS/TTL-level
- 8-bit local bus (A0-A7, D0-D7), with 4x chip selects
- Small footprint, 80x50mm ony
- Ultra low power consumption, less than 2.5W
- Linux 2.6.x OS is pre-built, supports file system
- GNU C/C++ tool chain is included
The M-501 is a credit card size ARM9-based SoM (System-on-Module). It includes an ATMEL AT91RM9200 ARM9 CPU, 64MB SDRAM and 16MB Flash. The operation system, Linux kernel 2.6.x with file system support, is pre-built in the M-501.
- M-501 Starter Kit
M-501 Starter Kit
Evaluation Kit for M-501 Embedded SoM
Features
- One M-501 embedded module
- One carrier board with
- one RS-232/422/485 line driver, RJ45 connector
- three RS-232 line drivers, RJ45 connector
- one RJ45 connector for Ethernet
- two USB host connectors
- two 20-pin headers for 32x GPIOs
- Status LEDs for Etherent port and serial port
- power input circuitry (9~48VDC) - GNU C/C++ Tool Chain CD and documentation
