The GE DLynx offers digital control and communication in ultra-compact industry standard footprints. Multiple devices can use industry standard PMBus communication to monitor and optimize power conversion, even during operation, making Adaptive Voltage Scaling (AVS) a reality. A minimum of three external components are needed to implement these modules, which leads to shortened design time. The GE DLynx* family provides some of the most compact Point of Load DC-DC converters available with outstanding performance, control, and reliability at a cost competitive rate.
The new GE DLynx II extends the commitment to providing the digital power designer the latest tools and performance for power. Increased current, increased accuracy, extended PMBus command set and increased performance are all welcome tools for a dynamic and demanding industry. Ultimate density and competitive cost keep these new products at the forefront of the demanding designer.
The DualDLynx non-isolated Point of Load (POL) DC/DC board-mounted power modules offer a new standard of power for space constrained boards. They offer up to 25 percent reduction in board space usage compared to previous and competing solutions. The Independent Power Train (IPT) feature provides two independent 12 A or 6 A outputs in a single module, enabling flexibility and reduced design time. Analog and digital options are available. The DualDLynx has a PMBus digital interface for digital configuration, communication and control. Enhanced digital features reduce board space requirement and the need for external components.
• 2 to 40 A output current DLynx
• 3 to 170 A output current DLynx II
• > 300 A with current sharing version TJT120P
• 4,5 - 14,4 V DC input models
• 0,51 to 5,5 V DC output models
• Dual offering – both digital & analog versions
• Standards-based DOSA footprint
• Tunable Loop
• Digital communication (PMBus)
• Total Efficiency architecture
• Superior thermal performance
• EZ-Sequence
• Cost efficient open frame design
DualDlynx
• Independent Power Train Feature enables flexibility and reduces design time
• PMBus digital interface supports wide range of commands (on/off, trim, digital sequencing, margin, power good, rise time adjustment and input under-voltage lockout)
• The digital interface also offers output voltage, current and temperature measurement capabilities
• Ultra-tight voltage regulation (+/- 1 percent)
• Digital trim for power reduction and digital sequencing
• Over-temperature protection, output over-current protection (non-latching) and over-voltage protection
• Wide input voltage range: 4,5 V DC - 14,0 V DC on both inputs
• New synchronization features and remote sensing make designing for strict noise and set point requirements easier and more accurate
• Small Micro footprint module (20,32 mm x 11,43 mm x 8,5 mm)
• Precisely regulated output voltage range of 0,51 to 5,5 V DC
• Wide range of design tools and technical support to decrease design time and improve time to market
• Digital loop compensation decreases board space, external components and cost
• Reliability measured in decades provides peace of mind
Der Vorteil von Tunable Loop bei ABB-DC/DC-Wandlern
ABB, hervorgegangen aus GE, steht für hochzuverlässige Stromversorgungslöungen ("critical power").
Das Embedded Power-Sortiment bietet Hochleistungs-Industriestromversorgungen, ob als klassisches Netzteil oder DC/DC-Wandler für On Board-Lösungen, isolierend DC/DC und nichtisolierende POLs
PicoDLynx*
MODEL
NUMBER
INPUT
VOLTAGE
OUTPUT
VOLTAGE
OUTPUT
CURRENT
COMM.
PEAK
EFFICIENCY
DIMENSIONS
PNVX002 3.0-14.0V 0.6-5.5V 2A Analog 96% 12.2 x 12.2 x 4.5 mm
PVT003 3.0-14.4V 0.45-5.5V 3A Digital 94% 12.2 x 12.2 x 6.25 mm
PVX003 3.0-14.4V 0.6-5.5V 3A Analog 92% 12.2 x 12.2 x 6.25 mm
PDT006 3.0-14.4V 0.45-5.5V 6A Digital 94% 12.2 x 12.2 x 6.25 mm
PVX006 3.0-14.4V 0.6-5.5V 6A Analog 94% 12.2 x 12.2 x 6.25 mm
PDT012 3.0-14.4V 0.45-5.5V 12A Digital 96% 12.2 x 12.2 x 6.25 mm
PVX012 3.0-14.4V 0.6-5.5V 12A Analog 95% 12.2 x 12.2 x 6.25 mm
MicroDLynx*
UDT020 3.0-14.4V 0.45-5.5V 20A Digital 96% 20.32 x 11.43 x 8.6 mm
UVT020 3.0-14.4V 0.6-5.5V 20A Analog 96% 20.32 x 11.43 x 8.6 mm
MegaDLynx*
MDT040 4.5-14.4V 0.45-2.0V 40A Digital 91.5% 33.02 x 13.46 x 10.9 mm
MVT040 4.5-14.4V 0.6-2.0V 40A Analog 91.5% 33.02 x 13.46 x 10.9 mm
FemtoDLynx II*
FKX003 4.5-14.0V 0.6-5.5V 3A Analog 93.5% 6.8 x 9 x 7.2 mm
FKX006 4.5-14.0V 0.6-5.5V 6A Analog 93.5% 6.8 x 9 x 7.2 mm
PicoDLynx II*
PJT004 4.5-14.4V 0.51-5.5V 4A Digital 97.5% 12.2 x 12.2 x 7.5mm
PJT007 4.5-14.4V 0.51-5.5V 7A Digital 97.5% 12.2 x 12.2 x 7.5mm
PKX007 4.5-14.4V 0.6-5.5V 7A Analog 97.5% 12.2 x 12.2 x 7.5mm
PJT014 4.5-14.4V 0.51-5.5V 14A Digital 97% 12.2 x 12.2 x 7.5mm
PKX014 4.5-14.4V 0.6-5.5V 14A Analog 97% 12.2 x 12.2 x 7.5mm
PJT020 4.5-14.4V 0.51-3.63V 20A Digital 97% 12.2 x 12.2 x 8.5mm
PKX020 4.5-14.4V 0.6-3.63V 20A Analog 97% 12.2 x 12.2 x 8.5mm
MicroDLynx II* UJT035 4.5-14.4V 0.51-3.63V 35A Digital 97.25% 20.3 x 11.4 x 11mm
GigaDLynx II* GDT080 4.5-14.0V 0.6-2.0V 80A Digital 93% 33.02 x 22.86 x 12.7 mm
TeraDLynx II*
TJT120 7.0-14.0V 0.1-1.5V 120A Digital 96% 54 x 31.8 x 13.6 mm
TJT170 7.0-14.0V 0.1-1.5V 170A Digital 96% 54 x 31.8 x 13.6 mm
DualDLynx
MODEL
NUMBER
INPUT
VOLTAGE
OUTPUT
VOLTAGE
OUTPUT
CURRENT
COMM. DIMENSIONS
UDXS0606 4.5Vdc-14.4Vdc 0.51Vdc to 5.5Vdc 2 x 6A Digital 20.32 mm x 11.43 mm x 8.5 mm
UVXS0606 4.5Vdc-14.4Vdc 0.51Vdc to 5.5Vdc 2 x 6A Analog 20.32 mm x 11.43 mm x 8.5 mm
UDXS1212 4.5Vdc-14.4Vdc 0.51Vdc to 5.5Vdc 2 x 12A Digital 20.32 mm x 11.43 mm x 8.5 mm
UVXS1212 4.5Vdc-14.4Vdc 0.51Vdc to 5.5Vdc 2 x 12A Analog 20.32 mm x 11.43 mm x 8.5 mm
Power Components